Featured in the April 2009 issue of Muscle Mustangs & Fast Fords magazine (pages 92-100)! Check out Realspeed's Nitrous Pro-flow install article online here! Nitrous Pro-Flow single nozzle wet systems are designed to maximize performance of fuel-injected applications. These systems incorporate Nitrous Pro-Flow's new V-Force 2 nozzle and Programmable TPS Activation System that works with the Mustang’s “throttle-by-wire” throttle body. The V-Force 2 nozzle was designed specifically for applications where nitrous in injected upstream of the throttle, to provide the best possible cylinder-to-cylinder distribution characteristics for maximum power and reliability. The Programmable TPS Activation System utilizes the vehicle's throttle position sensor to properly activate the nitrous system at wide-open throttle only. Jets are included for a 50, 75, 100, 125, and 150 hp increase. Choose from a universal kit or a complete kit with specifically sized lines, a custom solenoid mounting bracket, and customized installation instructions for a direct bolt-on to the 2005-2006 Mustang. This is also the best fitting kit for the 2007-2009 Mustang but requires minor modification to the solenoid mounting bracket due to a slight change in the ford strut tower. A universal kit is also kit is also available. Call for best price! *This part is over-sized and may incur additional freight* Fits 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Mustangs |
|
| A critical tool for monitoring your nitrous bottle. |
|
|
| #4 Male Flare X #4 Female Flare Swivel Blue |
|
|
| Nitrous Pro-flow bottle warmers have greater surface area than other brands for quicker heating. |
|
|
| Nitrous Pro Flow #4 Purge Kit is designed to be plumbed into the main nitrous feed line with no additional fittings required. A purge system allows any vapor in the nitrous feed line to be purged prior to the nitrous system activation. This eliminates any lag caused by the time required for the liquid nitrous to reach the plate or nozzle. Fits 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Mustangs |
|
|
| Featured in the April 2009 issue of Muscle Mustangs magazine! Quick bottle changes. Rubber O-rings in the clamps grip the bottle to prevent scratches & movement. |
|
| www.realspeedauto.com Ph.631-563-7325 All parts listed are for the Ford Mustang unless otherwise noted. Copyright 2012 Realspeed Automotive Inc. All rights reserved. mustang parts:: mustang performance parts:: 2005 mustang parts:: mustang cobra parts:: ford mustang performance parts:: 2005 mustang performance parts:: ford mustang racing parts:: aftermarket mustang parts:: after market mustang parts:: high performance mustang parts:: fox body mustang parts:: billet accessories:: mustang cold air intake:: best lower control arms mustang:: shifters:: short shifter:: shifter:: mustang lowering springs:: pro 5.0 shifter:: mustang clutch:: |