 |
 |  | SCT Computer Chips

|  |  |  | SCT X4 Flash Tuner
 Retune your mustang for more power.

|
 |
 |
 |  | SCT Big Air Mass Air Meter

|  |  |  | BBK 76MM Mass Air Meter Factory Air Box Calibration 86-93

|
 |
 |
 |  | BBK 76MM Mass Air Meter Cold Air Calibration 86-93

|  |  |  | V-3 Superchargers with Internal Oil Reservoir
 The easiest and most cost effective means of adding an average of 46% more horsepower to your vehicle

|
 |
 |
 |  | Vortech Superchargers for 86-95 Mustang
 The easiest and most cost effective means of adding an average of 46% more horsepower to your vehicle.

|  |  |  | Vortech Superchargers for 96-04 Mustangs
 The easiest and most cost effective means of adding an average of 46% more horsepower.

|
 |
 |
 |  | Power Pipes for Supercharged Engines
 Power pipes increase airflow to the supercharger intake. This increases boost and horsepower without excess heat. Increases of 2 to 5 psi and 10 to 40 HP are typical depending upon engine configuration.

|  |  |  | Mr Freeze Gen2 Alcohol Injection
 In initial testing, AFM has documented up to as much as 90 additional rear wheel horsepower using 93 octane pump gas.

|
 |
 |
 |  | Power Pipes for Naturally Aspirated Engines
 Higher volume, better flowing, mandrel bent intake pipes increase horsepower. They also relocate the Mass Air meter and filter to the inner fenderwell for a cooler intake charge.

|  |  |  | BBK Cold Air Induction 86-95
 Looking for a quick and easy way to gain an additional 10-14 hp? Look no further than these cold air induction kits from BBK.

|
 |
 |
 |  | BBK Cold Air Induction 96-04
 unmatched high-flow design for superior performance and striking good looks

|  |  |  | Steeda Cold Air Intake Kit 96-04 GT
 Less restriction and more surface area with this high-flow air kit!

|
 |
 |
 |  | High Flow Air Intake 96-04 Cobra
 Dyno tested for 10 to 15 horsepower on a stock Cobra and up to 25 HP on a modified Cobra.

|  |  |  | Steeda Cold Air Kit for 03/04 Mach 1
 Designed to work with the shaker hood scoop and features and velocity stack for improved airflow.

|
 |
 |
 |  | BBK Cold Air Induction 94-04 V6
 unmatched high-flow design for superior performance and striking good looks

|  |  |  | BBK Aluminum Underdrive Pulley Kit 79-95
 Bolt on quick HP!

|
 |
 |
 |  | Steeda 4.6L Underdrive Pulleys
 Bolt on 8-10 horsepower

|  |  |  | A/C Eliminator Kit 85-93
 Free up some extra Horsepower on your 5.0L Mustang with this A/C Eliminator kit.

|
 |
 |
 |  | BBK Throttle Body 86-95
 More Air = More Power

|  |  |  | BBK EGR Spacer Plate 86-93
 Available in 65mm, 70mm, & 75mm to match your throttle body.

|
 |
 |
 |  | BBK Throttle Body 96-04 GT
 More Air = More Power

|  |  |  | BBK 78mm Intake Elbow with Throttle Body 96-04
 More Air = More Power

|
 |
 |
 |  | BBK Throttle Body 94-04 V6
 More Air = More Power

|  |  |  | Billet Belt tensioner for Vortech 86-93
 An easier way to adjust your supercharger belt

|
 |
 |
 |  | Billet Adjustable Fuel Pressure Regulator 86-93
 Tune your fuel pressure for performance with an adjustable pressure regulator. Improved design flows 30% more fuel, eliminating idle fuel pressure surges.

|  |  |  | Adjustable Fuel Pressure Regulator 94-98
 Tune your fuel pressure for performance with an adjustable pressure regulator. Improved design flows 30% more fuel, eliminating idle fuel pressure surges. Fits 94-97 GT, 94-98 Cobra & 94-98 V6

|
 |
 |
 |  | Sieman Deka 60 Lb High Impedance Injectors (Set of 8)

|  |  |  | O2 Sensor Harness Extension 1986-10
 Oxygen sensor extension harness sets feature a direct plug-in design. They are a must with full-length headers and other specific applications.

|
 |
 |
 |  | PCV Oil Separator 79-04
 Reduces detonation, oil burning and deposits on the valves by removing oil from the PCV system

|  |  |  | Tappet Tool (Lifter magnets)
 This a great time saver for changing cams.

|
 |
 |
 |  | EGR Eliminator Bracket

|  |  |  | High Flow Aluminum Fuel Rail - 4.6L

|
 |
 |
 |  | High Volume Fuel Pump
 BBK Performance fuel pumps are direct-replacement in-tank fuel pumps

|  |  |  | High Flow Billet Fuel Rail System for 5.0L
 Large diameter rail flows far more fuel than the stock rail can handle. A must for modified applications over 450 rwhp.

|
 |
 |
 |  | BBK PHENOLIC SPACER
 A great cheap way to add 4-6 horsepower

|  |  |  | 255LPH "High Pressure" Fuel Pump 86-98
 Maintain high fuel flow even at the elevated fuel pressures.

|
 |
 |
 |  | Steeda #19 Camshaft - 85-95
 Features a split pattern which favors the exhaust side, and a wide 115° lobe separation for low overlap.

|  |  |  | Camshafts for Natrually Aspirated 4.6L 2V
 Camshafts makes a significant improvement in all phases of engine power and performance.

|
 |
 |
 |  | Camshafts for Supercharged 4.6L 2V
 Camshafts makes a significant improvement in all phases of engine power and performance.

|  |  |  | Camshafts for 5.0L Mustangs
 Camshafts makes a significant improvement in all phases of engine power and performance.

|
 |
 |
 |  | Comp Cams for 2V 4.6L

|  |  |  | Ford Racing 9MM Spark Plug Wires

|
 |
 |
 |  | Spark Plugs TR6 NGK-4177

|  |  |  | Autolite Spark Plugs

|
 |